Category Archives: Windows

MS Windows Audioware

AudioStation ~ Old School Player

Posted by tom2tec on

With AudioStation you can easily listen to the most common music files like mp3 and wav etc. Just click on the music file and AudioStation will automatically start playing your favorite music.

Features:

  • With original Creative Labs™ sample files (reggae.mid, jaz.mid, etc.)
  • Support for multiple playlists (wpl, pls, m3u, etc.)
  • Track repeat and random shuffle functions
  • Supporting languages: English & Dutch
  • Plays all common audio files like mp3, wav, mid, etc.
  • Midi Player, Wav Player, Mp3 Player & CD Player
  • Also support for cda, m4a, ra, rm, act, caf, wsaud, w64, ogg, amo, voc
  • With Floppy, Tape and CD-ROM animations
  • Working mixing sliders
  • With audio record function
  • With audio capture function to record speaker sound
  • Support for Commodore64 sound files (sid)
Audiostation mp3 interface

www.audiostation.org
github.com/Sibra-Soft/audiostation
sourceforge.net/projects/audio-rack-media-player

cyanrip ~ Accurate & Secure Ripper

Posted by tom2tec on

Fully featured CD ripping program able to take out most of the tedium. Fully accurate, has advanced features most rippers don’t, yet has no bloat and is cross-platform.

Features:

github.com/cyanreg/cyanrip

LoopBe1 ~ Virtual MIDI Driver

Posted by tom2tec on

LoopBe1 is an internal MIDI device for transferring MIDI data between computer programs. Basically LoopBe1 is an ‘invisible cable’ connecting a MIDI out port of an application to any other application’s MIDI in port. All MIDI data sent to the program’s output is channelled to the receiving applications in realtime. You may connect up to eight applications to LoopBe’s in port and up to eight applications to the out port, all sending and receiving at the same time.

LoopBe1 is a native Windows™ WDM kernel mode driver, so expect the lowest possible latency. Programs do not need to link with special libraries, so LoopBe1 works with every MIDI or DirectMusic™ capable application.

nerds.de/en/loopbe1

AUDMES ~ Oscilloscope & Spectrum Analyzer

Posted by tom2tec on

AUDio MEasurement System – multi-platfrom system for audio measurement through a PC sound card. Incorporates generator, oscilloscope, audio spectrum analyzer (FFT) and frequency sweep characteristic. Can be compiled and works under Linux, Windows and MacOS.

Features:
  • Display audio spectrum (FFT)
  • Show wave form
  • Generate tones
  • Only requires a sound card
  • Uses WxWidgets
  • Source code available

sourceforge.net/projects/audmes

Resources:

en.wikipedia.org/wiki/Spectrum_analyzer
en.wikipedia.org/wiki/Oscilloscope

Tuniac ~ iTunes Styled Windows Player

Posted by tom2tec on

Tuniac is an iTunes style media player / manager for Windows, with an advanced playlist editor, search as you type and queue support.

Features:

  • Search as you type
  • Advanced queueing
  • Supports many audio formats
  • OpenGL Sonique Visual Plugin renderer
  • Small cpu and memory footprint

Supports:

  • MPEG-1 Audio (mp3, mp2, mp1)
  • FLAC (flac, fla, oga, ogg)
  • Advanced Audio Coding (aac, m4a, m4b, mp4)
  • Apple Lossless Audio Codec aka ALAC (m4a)
  • Windows Media Audio (wma)
  • Vorbis (ogg)
  • Opus (opus)
  • WavPack (wv)
  • TAK Audio (tak)
  • TrueAudio (tta)
  • Monkeys Audio (ape, mac)
  • Musepack (mpc, mp+, mpp)
  • OptimFrog (ofr, ofs)
  • Shorten (shn)
  • Dolby Digital (ac3)
  • DSD (dff, dfs)
  • PCM (wav, aif)
  • CD Audio (cda)
  • Speex (spx)
  • MOD Formats (mod, mo3, xm, it, s3m, mtm)
  • Game Audio Formats (adx, umx)
  • MIDI (mid)
  • radio streaming of most the above formats.

Polymeter ~ Compose Polymeter Based Music

Posted by tom2tec on

Polymeter is a MIDI sequencer for music that’s in multiple prime meters (1, 2, 3, 5, 7, 11, etc.) simultaneously. Each track has its own loop length, and when the lengths differ, the tracks “slip” (or shift phase) relative to each other. The resulting interference pattern is sufficiently intricate that variations similar to the embellishments of a live performer can be generated algorithmically.

Features:

  • Multitrack step sequencer for polymeter
  • Each track has its own loop length
  • Any number of tracks, of any length
  • Full clipboard support (copy/cut/paste)
  • Unlimited undo and redo for all edits
  • Multiple tracks can be edited at once
  • Optionally shows current position within each track
  • Drag reordering of tracks
  • Exports a MIDI file
  • Join adjacent steps to make tied notes
  • Velocity editing
  • Controller tracks
  • Recording of live arrangement
  • Editing of arrangement on timeline
  • Inter-track modulation of mute, note, velocity, duration, position, and more
  • Live performance view with full screen mode
  • Recursive modulation (modulation of modulation) for mute and position
  • Modulation graphing via Graphviz
  • MIDI mapping of all parameters with learn mode
  • Optionally transmits MIDI clock

TspCheck ~ Loudspeaker Thiele / Small Paramaters

Posted by tom2tec on

As the program name suggests, TspCheck is a program that checks whether the determined or specified TS parameters of a loudspeaker match. Often you can then find out, for example, that the efficiency has been rounded up a bit too benevolently, or you can estimate the membrane mass, the resilience of the restraint, etc. by cleverly combining the information available.

In addition, the following is determined:

  • Max. Lin. SPL @ 50 Hz in CB – the maximum sound pressure that can be achieved in a closed housing at 50 Hz using the maximum linear stroke
  • SPL_m = SPL_e – the frequency from which the maximum achievable sound pressure at full input power is stroke limited.

http://www.picosound.de/E_SOFT.HTM#tspchk

BallroomDJ ~ Ballroom Audio Player

Posted by tom2tec on

BallroomDJ is a ballroom music player. It is designed to be able to play music the entire evening without intervention. Use for your personal training, dance studio, and ballroom, dancesport, Argentine tango, country western, or west coast swing events.

yplayer ~ Desktop YouTube Audio Player

Posted by tom2tec on

Stream audio from YouTube. Plays only the audio from YouTube videos, this reduces bandwidth and improves performance.

https://github.com/haikelfazzani/yplayer

Funkwhale ~ Decentralised Music Network

Posted by tom2tec on

Looking for a social platform to enjoy and share music? Funkwhale is a community-driven project that lets you listen and share music and audio within a decentralised, open network.

funkwhale.audio

AAX Audio Converter ~ AAX To mp3 Or m4a

Posted by tom2tec on

  • Free and Open Source software.
  • Converts Audible proprietary .aax files to plain .mp3 or .m4a/.m4b.
  • Also offers basic support for older .aa files.
  • Windows application, with all the classic features of the Windows eco-system.
  • Requires activated Audible Manager/App or personal activation code.
  • Processing Modes:
    • One output file per input file.
    • Multiple output files per input file, divided by chapter.
    • Multiple output files per input file, divided by chapter and further split into shorter tracks of roughly equal length.
    • Multiple output files per input file, split into shorter tracks of roughly equal length, ignoring chapters.
  • Creates additional playlist if more than one output file is created per book.
  • Handles books with multiple parts.
  • Manages and preserves all meta-tag information.
  • Supports named chapters, for .aax files downloaded with the Audible App.
  • Can adjust inaccurate chapter marks.
  • Allows customization of output naming: files, folders and tags.
  • Delegates all audio processing to powerful FFmpeg, including DRM handling.
  • High performance: Utilizes all available processor cores to run conversion work in parallel.
  • Optionally copies original .aax file to a new location after the conversion, with a customizable name.
  • Automatically launches default media player after conversion has completed.
  • Log facility, optional, to record program activity, activated with program argument.
  • Online update function: Will automatically scan the website for a new version, download and install it.
  • Technical:
    • .Net Framework application, written in C# with Windows Forms, the Task Parallel Library and other goodies from language and framework.
    • Incorporating a number of snippets from the Open Source community.

https://github.com/audiamus/AaxAudioConverter

Tomahawk ~ Metadata Based Player

Posted by tom2tec on

Tomahawk is a free multi-source and cross-platform music player. An application that can play not only your local files, but also stream from services like Spotify, Beats, SoundCloud, Google Music, YouTube and many others. You can even connect with your friends’ Tomahawks, share your musical gems or listen along with them. Let the music play!

Tomahawk is basically a player for music metadata. At its core it decouples the metadata about a song from the source and reassembles it for each user based on their individual music accessibility and rights. In short, given the name of a song and artist, Tomahawk will find the right source, for the right user at the right time. This fundamentally different approach to music enables a range of new music consumption and sharing experiences previously not possible.

Music Sources:
  • Local music library (MP3, Ogg, FLAC and many other formats)
  • Networked music libraries (other connected computers)
Subscription Music Services
Free Streaming / Music Promotion Platforms
Network/Cloud storage

Third party-developed resolvers have also been written for services like YouTube, Qobuz and others. We’ve also heard of digital music distributors writing their own for their internal CMSes to help them navigate and preview their content. That’s cool.

https://github.com/tomahawk-player/tomahawk