SIO4ALL is a hardware independent low latency ASIO driver for WDM audio devices. It uses WDM Kernel Streaming and sometimes even more sophisticated methods to achieve its objectives.
In order to successfully run ASIO4ALL, you need:
- A WDM-compatible operating system, such as Win98SE/ME/2k/XP/2003/XP64 or Windows Vista x86/x64.
- A WDM-driver for your audio hardware. (Under Win2k/XP/Vista… this is implicit, not so under Win98SE/WinME.)
- A couple minutes of your time and a little bit of luck.
What ASIO4ALL will NOT do:
- Replace your existing sound card drivers or mess with them in any way.
- Install any kernel mode components that could potentially affect the stability of your system.
- “Overclock”, or otherwise operate your audio hardware in ways that could potentially be harmful and/or void your warranty, except, of course, in cases where the manufacturer of your hardware has specifically stated that the use of ASIO4ALL would void your warranty indeed.
Category Archives: Software
Cloud Seed ~ Algorithmic Reverb
Cloud Seed is an algorithmic reverb plugin built in C# and C++ for emulating huge, endless spaces and modulated echoes. The algorithms are based on the same principles as manu classic studio reverb units from the 1980’s, but Cloud Seed does not attempt to model any specific device, or even to be a general-purpose reverb plugin at all. It is best employed as a special effect, for creating thick, lush pads out of simple input sounds.
github.com/ValdemarOrn/CloudSeed
Share this:
CHOW ~ Maximally Truculent Distortion
CHOW is a digital distortion effect designed for maximum truculence, somewhere between a true half-wave rectifier and a noisy vintage compressor. Useful for mixing guitars, drums, even vocals when a heavily degraded sound is desired. Feel free to build and use for your own enjoyment!
github.com/jatinchowdhury18/CHOW
Share this:
Multiply ~ Clear Chorus Effects
Acon Digital Multiply is a free and versatile chorus effect with a unique twist. Each simulated voice is processed with a phase randomizing filter so that unpleasant comb filter effects are avoided. The effect can be used to simulate the effect of several performers playing the same tones simultaneously, to widen the spatial image or to create special effects for sound design. Multiply can simulate up to 6 additional voices and both the pitch and the loudness of the voices can be modulated. There is also an integrated equalizer consisting of low cut, low shelf, high shelf and high cut filters that can be applied to the effect signal. An integrated pre-delay section makes it possible to create modulated and diffuse echo effects.
acondigital.com/products/multiply
Share this:
Radio Tray ~ Linux Radio Player
Radio Tray is an online radio streaming player that runs on a Linux system tray. Its goal is to have the minimum interface possible, making it very straightforward to use. Radio Tray is not a full featured music player, there are plenty of excellent music players already. However, there was a need for a simple application with minimal interface just to listen to online radios. And that’s the sole purpose of Radio Tray.
Features:
- plays most media formats (based on gstreamer libraries)
- drag & drop bookmarks support
- easy to use
- supports PLS playlist format (Shoutcast/Icecast)
- supports M3U playlist format
- supports ASX, WAX and WVX playlist format
- extensible by plugins
Radiotray-NG: An Internet radio player for Linux (updated fork)
github.com/ebruck/radiotray-ng
Share this:
BinAural VST ~ Mono To 3D Stereo
A mono-to-stereo VST plugin that positions sound in a 3D space using Head-Related Transfer Functions. Created with JUCE framework.
Share this:
Audio Effects ~ Theory, Implementation & Application
Collection of audio effects plugins implemented from the explanations in the book ~ “Audio Effects: Theory, Implementation and Application” by Joshua D. Reiss and Andrew P. McPherson.
- Chorus
- Compressor-Expander
- Delay
- Distortion
- Flanger
- Panning
- Parametric EQ
- Phaser
- Ping-Pong Delay
- Pitch Shift
- Ring Modulation
- Robotization-Whisperization
- Template Frequency Domain
- Template Time Domain
- Tremolo
- Vibrato
- Wah-Wah
github.com/juandagilc/Audio-Effects
Share this:
Argotlunar ~ Granulator VST / AudioUnit
Argotlunar is a tool for creating surreal transformations of audio streams. Specifically, it is a real-time delay-line granulator. It disintegrates an audio stream into short samples (grains). Each grain can have random settings of amplitude, panning, duration, delay, pitch, glissando, filter and envelope. The output of all grains is mixed together into a stream which can be fed back into the main input.
Time-related parameters can be synced to the host tempo, for rhythmic and pulsing textures. Pitch-related parameters can be quantized for harmonic and melodic effects. Feedback can create chaotic, densely layered, and distorted sounds.
Most of the parameters can be correlated. Examples:
- Filter cut-off correlated with pitch: Higher filter cut-off for grains with higher pitch, and vice versa.
- Grain duration correlated with panning: Grains with shorter duration panned to the centre of the stereo field, and grains with longer duration panned wide in the stereo field.
mourednik.github.io/argotlunarhttps://mourednik.github.io/argotlunar/
github.com/mourednik/argotlunar
Share this:
andes ~ Perlin Noise Sound Synthesiser
Andes is a standalone software synthesiser, or plugin, in early stages of development. The core of Andes is an original oscillator which uses a pseudo-3D version of Perlin Noise to produce distinctively digital sound.
artfwo.github.io/andes
github.com/artfwo/andes
Share this:
TT Dynamic Range Meter ~ Determining Dynamic Range
TT Dynamic Range Meter makes it possible to provide releases with a whole-number dynamic value to be printed on the recording medium as a logo, giving consumers an immediate means of knowing the dynamic quality of a recording. ~ web.archive.org/web/20090422090108/http://www.pleasurizemusic.com/en/download
dr.loudness-war.info
en.wikipedia.org/wiki/Loudness_war
dynamicrangeday.co.uk
Share this:
foo_dynamic_range ~ Foobar & Dynamic Range Meter
Dynamic Range Meter is a foobar2000 component designed to give the same information as the Dynamic Range Offline Meter. This component can process all audio formats foobar2000 can handle (a.o. flac, ape and wavpack) and also supports higher sample rates and bit depth. Using the Open Audio CD option it can also directly read audio CDs and calculate the Dynamic Range values without the need of ripping the CD to disk. Log information with extended statistics is automatically copied to the clipboard and can be pasted back in any text editor. ~ web.archive.org/web/20130317013715/http://pleasurizemusic.com/free-downloads
Dynamic Range Meter is a foobar2000 component designed to give the same information as the Dynamic Range Offline Meter from the Pleasurize Music Foundation. I wrote this component because the original Dynamic Range Meter is limited to reading only wav, aiff and mp3 files. This component can process all audio formats foobar2000 can handle (a.o. flac, ape and wavpack) and also supports higher sample rates and bit depth. Using the Open Audio CD option it can also directly read audio CDs and calculate the Dynamic Range values without the need of ripping the CD to disk. As an option, a log file with information and extended statistics can be saved to disk. ~ web.archive.org/web/20130428024316/http://www.jokhan.demon.nl/DynamicRange
foo_dynamic_range is for foobar2000 version 1.4 or older and is depreciated. Use foo_dr_meter instead.
Adding Dynamic Range:
- Install the foo_dynamic_range component
- Navigate to File > Preferences > Advanced > Tools > Dynamic Range Meter
- Enable “Write DR meta data tags“
- Add a new toolbar button and assign Context>Dynamic Range Meter
- Download DR toolbar icon and change button icon
- Navigate to File > Preferences > Display > Default User Interface > Playlist View
- Add a new custom column, name it “DR” and assign this pattern, “[%DYNAMIC RANGE%]“
- Select an album and click the new DR toolbar icon to scan the files
Download ~ drive.google.com/file/d/1rQHOYrzEmV6MSKEj-hENM09C2yQsCFfh/view
Database ~ dr.loudness-war.info
Discussion ~ hydrogenaud.io/index.php/topic,88373.0
DRM Icon ~ drive.google.com/file/d/1x4AjjKEHTH9BZWTHb-5PQoNKOboXJJcq
Reference ~ www.metal-fi.com/measuring-dynamic-range
foo_dr_meter (64bit) ~ foobar.hyv.fi/?view=foo_dr_meter
Share this:
OwlPlug ~ Audio VST Plugin Manager
OwlPlug is a desktop application for Windows and Mac that simplifies VST Plugin management and installation. User installed plugins are automatically discovered and new plugins can be installed through Stores. The default store called OwlPlug Central delivers quality plugins made by the community. Any third party plugin distributors can set up a compatible Store and let owlplug interact with it. OwlPlug is still in a beta stage, all kind of feedbacks are welcomed.
owlplug.com
github.com/DropSnorz/OwlPlug
The Audio File 