Tag Archives: AAX

ISOL8 ~ Mix Monitoring Tool

Posted by tom2tec on

ISOL8 divides the frequency range into 5 bands.

These 5 bands can be soloed or muted individually. This will help you to concentrate on certain frequency ranges during the mixing and mastering process.

On top you can use ISLO8 as a flexible multi-band splitter with following complex plugin chains. The split signal can finally be mixed together.

Isol8 is originally designed to be used on the master track, but it can also be used on individual audio track busses.

Features:

  • 5 adjustable frequency bands
  • solo/mute function for each band individually
  • Linkwitz-Riley crossover filter design
  • 24/48dB/Oct filter slope
  • multiple filter channel modes (Stereo/Left/Right/Mid/Side)
  • multiple monitor modes (Stereo/Left/Right/Mid/Side)
  • in-place or centered monitoring
  • swap left/right channel
  • adjustable output level
  • loudness dim function
  • keyboard control
  • multi channel split
  • large and easy to use GUI
  • free GUI scaling
  • 64-bit internal processing

www.tbproaudio.de/products/isol8

sTiltV2 ~ Freeware Linear Phase Equalizer

Posted by tom2tec on

sTilt is a linear / natural phase and IIR filter which tilts the audio spectrum around a given center frequency.

Features:

  • distortion free processing engine
  • adjustable slope from -6dB/Oct to +6dB/Oct
  • adjustable center frequency
  • 5 quality modes: low, eco, medium, high, max
  • 3 filter modes: linear phase, natural phase and zero delay
  • unit auto-gain
  • switchable clip protection
  • sample exact A/B comparison
  • stereo / left / right / mid / side channel selection
  • flexible channel monitoring
  • output gain
  • signal mixing
  • free GUI scaling

Note: This plugin adds significant latency to the audio path, which is usually compensated by DAW (PDC).

www.tbproaudio.de/products/stilt

TAL-NoiseMaker ~ Virtual Analog Synthesizer

Posted by tom2tec on

TAL-NoiseMaker is a virtual analog synthesizer with great sound and low CPU usage.

FEATURES:

  • 3 Oscillators
    Osc 1, +- 24 semitones, fine tune, phase control (saw, pulse, noise).
    Osc 2, +- 24 semitones, fine tune, phase control (saw, rectangle, triangle, sine).
    Sub Osc (rectangle).
  • Osc 1 PM for pulse waveform.
  • Osc 2 FM controled by Osc 1.
  • Osc 1 & Osc 2 sync to sub osc (saw, pulse, rectangle, triangle(bipolar sync)).
  • Adjustable master tune and transpose.
  • Up to 6 voices.
  • Portamento in mono and poly mode (off, auto, on).
  • Ringmod modulates Osc 1 with Osc 2
  • Self resonating 4x oversampled filters (24 dB LP, 18 dB LP, 12 dB LP, 6 dB LP, 12 dB HP, 12 dB BP, Notch)
  • Filter ADSR (negative and positive)
  • Volume ADSR
  • Routable ADSR, modulates Filter, Osc 1, Osc 2, PW, FM (negative and positive)
  • 2 LFO’s with different running modes: free, sync to host, triggered by note.
    Modulates filter, osc 1, osc 2, fm, pw, lfo rate, panorama and volume.
    Sine, triangle, saw square, s&h, noise.
    Positive and negative modulation.
    Phase control.
  • Adjustable Velocity dependent control over volume filtercontour and cutoff.
  • Adjustable Pitch Wheel control over Cutoff and Pitch.
  • One pole HP filter.
  • Detune, detunes notes randomly.
  • Juno chorus with different modes.
  • A built in reverb.
  • A built in delay.
  • Adjustable filter drive.
  • Bitcrusher, affects osc 1 and osc 2. Its a pre the filter stage effect.
  • Midi learn for all knobs.
  • Panic button.
  • Easy to use, no hidden panels.
  • 256 great presets (Presets by Frank “Xenox” Neumann / Particular – Sound, The Unshushable Coktor, Alexandra Sendy, TAL, Patrick Kunz).

tal-software.com/products/tal-noisemaker

TX16Wx ~ Software Sampler

Posted by tom2tec on

Base features

  • Re-sizable, flexible GUI
    • Full Undo/Redo support
    • Built-in file browser with sound playback and wave/program preview
    • Fully skinnable
    • Program icons
  • Dual playback engine
    • Direct from disk – supports massive sample sizes
    • RAM playback – sample accurate loop modulation
  • Unlimited multi-timbral operation
  • 128 voice polyphony
    • Two 6/12/24 dB resonant filters per voice
    • Low-, high, band- and all-pass
    • Notch, peak, low- and high shelf
    • Two sync-able LFO per voice
    • Two Modulation Envelopes per voice
    • Three Step Sequencers per voice
    • Modulation matrix with 16 modulation slots per voice
    • Three-way cross modulation (variable modulation strength)
    • Variable keyboard scales
    • Multiple trigger modes
    • Mono/Poly/Legato operation
    • 8 choke groups per program
    • Per-sample loop start/end/direction modulation
    • Polyphonic glide
    • Multiple glide modes
    • Polyphony limit per channel
    • VST micro tuning support
  • Built-in oscillators
    • Multiple waveforms.
    • Pulse width modulation.
    • Mix synthesized and sampled content.
  • Built-in sample editor
    • Automatic Loop Slicing + slice mapping
    • Actually Samples!* Record audio straight into the sampler from host (Requires routing/input capable host).
      • Built-in MIDI generator and automatic sample cutter for quick re-sampling of external or internal content
    • Automatic pitch detection
    • Loop tools
      • Loop auto detector
      • Loop overlay
    • Non-destructive, interactive loop cross fading
    • Multiple loop definitions per wave
      • Individual loops for sustain/release per mapping
    • Trim, cut, duplicate
    • Pitch detection
    • Normalize
    • Reverse
    • Tempo detection
  • Graphical keyboard mapping editor
    • Automatic sample layout
    • Flexible drag & drop-based group edit
    • Cut & paste or drag and drop move and copy between groups and programs
  • Quick select of sound data via MIDI
  • Drag & drop of samples/programs/performances/banks
  • Multiple outputs
    • 12 Stereo outputs, 8 of which can be switched to mono
    • Individual output mapping for key groups (drums)
  • 16 mappable controllers for modulation
  • 128 mappable VST parameters for modulation
  • All sound parameters can be automated or mapped to MIDI controllers
  • Preview loaded programs and samples in your song before loading
  • Reads multiple sample and bank formats
    • WAV/AIFF/AIFC
    • SoundFont 2
    • SFZ Files
    • Logic EXS
    • Akai AKP
    • Ogg Vorbis
    • FLAC
    • REX/REX2
    • Typhoon compressed AIFC files
    • Original Yamaha OS Wave files
  • 100% documented XML-based sound file format
    • Anyone can write conversion tools.
  • Saves data in DAW project directory
  • Low CPU usage
  • Fully native, optimized for SSE2.
  • Multi platform
    • MacOSX 10.7+ AU/VST2 (64bit)/VST3 (64bit)/AAX
    • Windows 7+ VST/VST3/AAX support
  • 64-bit support
  • Nice sound!
Home

TDR Nova ~ Cross-platform Equalizer Plugin

Posted by tom2tec on

NOVA is a parallel dynamic equalizer. Appearing in the familiar layout of a parametric equalizer, each band also includes a full featured dynamics section allowing the processor to cover an impressively wide range of applications. Be it a master lacking density, the drum bus asking for more crispiness, or a sibilance problem in your perfect take: NOVA has an elegant answer.

A user friendly WYSIWYG drag and drop display paired with a classic “knob” interface gives quick and smooth access to the various parameters driving NOVA’s powerful processing capabilities. With its four dynamic EQ bands and additional high-pass and low-pass filter sections, NOVA can meet the most exotic demand. Intuitive equal loudness functions help finding the optimal setting without getting distracted by loudness differences.

In practice, the processor covers a whole bucket of tasks:

  • Parametric equalization
  • Dynamic equalization
  • Frequency selective compression
  • Multi-band compression
  • Wideband compression

Of course NOVA features all helpers and workflow enhancements you’ve come to expect in a TDR plugin: A preset manager, undo/redo, A/B, detailed documentation, copy & paste, and much more.

www.tokyodawn.net
www.tokyodawn.net/tdr-nova

TAL Reverb ~ Cross Platform Reverberation VSTs

Posted by tom2tec on

TAL Reverb-II is a super diffuse and lush reverb effect with a fast build up time. Ideal for ambient reverb sounds.

TAL-Reverb-III is an easy to use stereo reverb plugin. It’s popular because it’s very very diffuse sound 😉 It has an additional signal feedback path.

tal-software.com/products/tal-reverb

Transport ~ Transport Info Display

Posted by tom2tec on

A handy little tool which provides all the information about measure, time, sample count etc that most hosts usually hide somewhere in a tiny little part of the screen. Transport is resizable and you can pick your own colours. Ideally, you’d drag it onto an external monitor in your 1000 square feet wooden studio and make it fullscreen so that your recording artists always stay oriented, but it works in smaller settings as well ;-). Made upon request by a DDMF user, we thought this gem is too good to not make it available for everybody. Transport is available as a 32 and 64 bit plugin in VST, RTAS, AAX (Win + Mac) and AU (Mac) format. MacOSX 10.6 is required.

ddmf.eu/freeware

RoughRider 3 ~ Dynamics Compressor VST

Posted by tom2tec on

Our RoughRider compressor is one of the most popular dynamics processors on the planet, with well over a half a million downloads over its decade-plus lifespan, and is in heavy daily use by producers the world over. With RoughRider 3, we’ve expanded the original to include an external sidechain input, the ability to turn off the built-in “warming” filter (the FULL BANDWIDTH button), and much more accurate metering.

www.audiodamage.com/pages/free-downloads

Ample Guitar M Lite ~ Martin D-41 Plugin

Posted by tom2tec on

Ample Guitar M Lite aims to bring a Martin D-41 Acoustic Guitar sound to your studio.

www.amplesound.net/en/pro-pd.asp?id=7

AAX Audio Converter ~ AAX To mp3 Or m4a

Posted by tom2tec on

  • Free and Open Source software.
  • Converts Audible proprietary .aax files to plain .mp3 or .m4a/.m4b.
  • Also offers basic support for older .aa files.
  • Windows application, with all the classic features of the Windows eco-system.
  • Requires activated Audible Manager/App or personal activation code.
  • Processing Modes:
    • One output file per input file.
    • Multiple output files per input file, divided by chapter.
    • Multiple output files per input file, divided by chapter and further split into shorter tracks of roughly equal length.
    • Multiple output files per input file, split into shorter tracks of roughly equal length, ignoring chapters.
  • Creates additional playlist if more than one output file is created per book.
  • Handles books with multiple parts.
  • Manages and preserves all meta-tag information.
  • Supports named chapters, for .aax files downloaded with the Audible App.
  • Can adjust inaccurate chapter marks.
  • Allows customization of output naming: files, folders and tags.
  • Delegates all audio processing to powerful FFmpeg, including DRM handling.
  • High performance: Utilizes all available processor cores to run conversion work in parallel.
  • Optionally copies original .aax file to a new location after the conversion, with a customizable name.
  • Automatically launches default media player after conversion has completed.
  • Log facility, optional, to record program activity, activated with program argument.
  • Online update function: Will automatically scan the website for a new version, download and install it.
  • Technical:
    • .Net Framework application, written in C# with Windows Forms, the Task Parallel Library and other goodies from language and framework.
    • Incorporating a number of snippets from the Open Source community.

https://github.com/audiamus/AaxAudioConverter

Multiply ~ Clear Chorus Effects

Posted by tom2tec on

Acon Digital Multiply is a free and versatile chorus effect with a unique twist. Each simulated voice is processed with a phase randomizing filter so that unpleasant comb filter effects are avoided. The effect can be used to simulate the effect of several performers playing the same tones simultaneously, to widen the spatial image or to create special effects for sound design. Multiply can simulate up to 6 additional voices and both the pitch and the loudness of the voices can be modulated. There is also an integrated equalizer consisting of low cut, low shelf, high shelf and high cut filters that can be applied to the effect signal. An integrated pre-delay section makes it possible to create modulated and diffuse echo effects.

multiply-acon

acondigital.com/products/multiply

FreeAmp ~ Audio Gear Modeler

Posted by tom2tec on

Sounding good has never been this cheap. Even though FreeAMP may look simple, all the algorithms from our amplifying modeler plugin REAMP are still in there. In this free version, we’ve combined our favourite profiles from REAMP into one universal profile. When processing audio through FreeAMP you’ll get the sound of tape and tube saturation at the same time. It can be used on anything that needs to be vitalized, from single tracks, stems or full mixes. And the best thing is that it is Totally free! (requires an account)

Requires macOS 10.9 or later, Windows 7 (SP1) or later, running a AU, VST or AAX compatible 64-bit host.

freeamp@2x

klevgrand.se/products/freeamp